Notes On A Wedding | North West Wedding Blog

Today we’ll show you how to make a mirrored vase that you can use on your reception tables to make a big impact. This is a very easy project: just five square mirror tiles, a hot glue gun, and a little bit of patience while you wait for the glue

to dry!

Instructions: Take the square mirror tiles and gently scrape off any stickers. Clean with windex or something similar. Turn the bottom tile upside down and holding another tile at 90 degrees, carefully hot glue along the edge and press the tiles together. Move onto the next side and glue the bottom and side edges. You might have to hold the tiles together for a couple of minutes so the glue can start to dry.

When the fifth tile

is in place, allow to dry for a couple of hours before using it. Remember that it will not be water tight so you will want to place a small plant pot or glass inside for fresh flower arrangements.

And voila! A stylish and elegant vase ready for use!

Sources: designspongeonline.com and theartofdoingstuff.com